Belt conveyor trippers for wooden chip were dispatched to Thailand

Last week(11th December),circular vibrating screen,belt conveyor with tripper designed for wooden chip production line were loaded to containers to be delivered from Qingdao Port to Bangkok PAT Port,all equipment will arrive with client after 10 days’ sailing.

 

Circular vibrating screen is used to separate wooden chip size larger than 50mm,and stone size smaller than 4mm.While the belt conveyor with tripper of width 1000mm and 650mm ,length 25m and 42m will be placed on the warehouse top in order to convey wooden chip to achieve the fully utilization of warehouse storage.

 

Besides,metal detector,permanent magnet and drum separator are also required by client,the permanent magnet which will be installed at the feeding end aiming at preventing materials from metals,metal detector and drum separator are used for the purpose of eliminating the metal in the production line.

Further information,please click: www.pkmachinery.com 

The Reason Why Circular Vibrating Screen can not Start up or Amplitude is Small

Circular Vibrating Screen is a kind of new and highly effective vibrating screen that does circular vibrations and has multiple layers which is available for smelting , quarry , coal preparation, ore dressing, energy, power, chemical industry, construction material. Here PK Machinery will introduce the problem we may meet during the operation of circular vibrating screen.

The reason why circular vibrating screen can not start up or amplitude is small

1. Low voltage
2. The control circuit of electrical components damage
3. The motor damages
4. The motor occurs failure
5. Too much materials are piled up on screen surface
6. Grease caking inside the motor 

The solution to slove circular vibrating screen can not start up or amplitude is small

1. Change the power supply
2. Replace the electrical components
3. Replace the motor
4. Maintain the motor
5. Clean up the materials on screen surface
6. Clean the motor, add proper grease
 

Structure and Features of Circular Vibrating Screen

Circular vibrating screen mainly consists of screen box, screen mesh, vibrator, damping spring mechanism, chassis, etc. Adopting cylinder postures eccentric shaft vibrator and eccentric block to adjust the amplitude, vibrator is installed on the screen box side plate, and rotation of belt drove by the motor, which generates centrifugal force and forces vibration of sieve box. Screening machine's side panel is made of high qualified steel plate, there is high strength bolt or ring groove rivet used for connection of side panel, beams and vibration. Vibrator is installed on the screen box side plate, driven by motor through coupling spin, along with all the produce centrifugal force to make the screen vibrate.

 Features of circular vibrating screen are as follows.

1, using eccentric block as exciting force, and the force is strong.

2, there is high strength bolt connection between beam and box of screen without welding.

3, simple structure, easy to maintain.

4, using tire coupling with flexible connection and reliable operation.

5, small amplitude, high efficiency, large dip angle structure, long service life, large capacity, low electricity consumption and low noise.

circular vibrating screen